Hi Friends! The Knit Magnolia Wrap is live! I absolutely loved working with Lion Brand's LB Collection, Cotton Bamboo. You can purchase the kit directly from their website at www.lionbrand.com.
The Magnolia Wrap is a rectangle wrap with beautiful lace edges. The center is knitted in stockinette incorporating minimal eyelet stitches.
The wrap is knitted in 2 pieces and grafted in the center for a seamless join.
This post contains affiliate links. Please see bottom of post for more information.
You can find the pdf pattern in my shops or save it as a favorite. Links to video and resources are provided in the pdf pattern as well.
Don't forget to subscribe to my blog and follow me over on Instagram @Designsbyphanessa.
Also, I have free patterns on my blog and ad-free printable patterns in my shops. Visit today and save them to your library!
YARN
Lion Brand LB Collection Cotton Bamboo, Magnolia | 940 yards
NEEDLES | Knitter’s Pride Ginger US8/5mm 30” Circular Needles
OTHER MATERIALS
Stitch Holder or Scrap Yarn
ABBREVIATIONS
co – Cast on st(s) – Stitch(es) sl st – Slip stitch
k – Knit
p – Purl yo – Yarn over
sk2p – Slip, k2tog, pass slip stitch over
sm – slip marker
pm – place marker
rep – Repeat rem – Remaining
SKILL LEVEL – Intermediate
NOTES – Pattern is written in US terms. The wrap is worked in 2 pieces, then grafted together with the Kitchener Stitch for a seamless join. Videos for alternative methods are provided.
Instructions | in US Terms
Make two
Co 103 Stitches
Row 1 (rs): k1, *k1, yo, k3, sk2p, k3, yo. Rep from *, end k2.
Row 2 (& ws rows): *p all sts.
Row 3: k1, *k2, yo, k2, sk2p, k2, yo, k1. Rep from *, end k2.
Row 5: k1, k2tog, *(yo, k1) twice, sk2p (k1, yo) twice, sk2p. Rep from * until you have with 3 sts left omitting last sk2p. End with k2tog, k1.
Rows 7-29: Rep Rows 1-6 four times.
Row 30 (ws): p22, pm, p59, pm, p22
The center panel starts on row 31.
Markers are placed on the sides to separate the stockinette sts and the lace sts. The lace panels continue in pattern. The eyelets in the center panel are worked every 10th row with alternating placements of the eyelets.
Row 31: k1, [k1, yo, k3, sk2p, k3, yo] twice, k1, sm, k until next marker, sm. Rep between [ ] twice, end k2.
Row 32, 34, 36: *p all sts.
Row 33: k1, [k2, yo, k2, sk2p, k2, yo, k1] twice, k1, sm, k until next marker, sm. Rep between [ ] twice, end k2.
Row 35: k1, k2tog, [(yo, k1) twice, sk2p (k1, yo) twice], sk2p. Rep between [ ] once, k2tog, sm, k until next marker, sm, k2tog. Rep between [ ] TWICE (Revised 5/15/21), k2tog, k1.
Rep rows 31-36 except for every 10th row (41, 51, 61, 71, etc).
Center Panel Instructions for eyelets after you slip your first marker:
Row 41: k8, [yo, sk2p, yo, k17] twice, yo, sk2p, yo, k8.
Row 51: k18, [yo, sk2p, yo, k17] twice, k1.
Rows 61, 71, 81, 91, 101, 111, 121, 131, 141, 151, 161, 171: Rep rows 41 & 51
Repeat Rows 31-36 until you have 14 rows of eyelets. After working the last set of eyelets (row 171), work another 5 rows in pattern ending on row 176. Place your sts on a stitch holder or scrap yarn.
Rep instructions for 2nd piece working only 13 rows of eyelets. After the 13th set of eyelets (row 161), work another 4 rows in pattern ending on row 165.
Place the first piece back on a needle. Bring both pieces together right side out and use the Kitchener’s Stitch (or desired method) to sew the 2 pieces together.
Try alternative methods of sewing
· 3-Needle Bind off (video)
· Vertical Seam (video). You will need to bind off first.
Kitchener’s Stitch | Video Tutorial
Insert yarn needle as if to purl in the first st of the front needle. Pull yarn through, leaving the st on the needle.
Insert the yarn needle as if to knit into the first st of the back needle. Pull the yarn through, leaving the st on the needle.
Insert the yarn needle as if to knit in the first stitch of the front needle (the same stitch as before) and slide this stitch off the needle. Insert the yarn needle into the next stitch on the front needle as if
to purl, but leave the st on the needle.
Insert the yarn needle as if to purl in the next stitch on the back needle, and slide this stitch off the needle. Insert the yarn needle in next stitch on back needle as if to knit. Pull the yarn through, but leave this stitch on the needle.
Continue back & forth across. When the last stitch is worked, pull the yarn end through the center of the stitch and pull gently to close. Weave in remaining end on the wrong side.
Finishing
Weave in ends and block to size.
For Designs by Phanessa patterns, visit my shops from main menu.
You may sell products using my patterns, but please give credit and link back to original designer & the patterns. Do NOT use any of my photos or copy/distribute any of my patterns as your own. If you share my free patterns, please link back to original pattern page. Please leave a comment if there are errors to any of my patterns. Thank you!
© 2021 Designs by Phanessa, All rights reserved.
PRIVACY and DISCLOSURE:
Designs by Phanessa is a participant in multiple affiliate programs that provides an advertising commission if you purchase through these links. If you purchase something from the affiliate links, I will get a small commission with no extra cost to you. I DO NOT collect, store, use, or share any data about you.
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPS Machine EPS Block…
EPS Machine EPS Block…
EPS Machine EPS Block…
AEON MINING AEON MINING
AEON MINING AEON MINING
KSD Miner KSD Miner
KSD Miner KSD Miner
BCH Miner BCH Miner
BCH Miner BCH Miner
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPS Machine EPS Block…
EPS Machine EPS Block…
EPS Machine EPS Block…
AEON MINING AEON MINING
AEON MINING AEON MINING
KSD Miner KSD Miner
KSD Miner KSD Miner
BCH Miner BCH Miner
BCH Miner BCH Miner
This technique might be part of a specific stitch pattern or slope game, so ensure you follow any additional instructions that may follow!